All Service Code


Sr. No. :152
Company :
Modal :
Code :

Sr. No. :151
Company :
Modal :
Code :

Sr. No. :150
Company :
Modal :
Code :

Sr. No. :149
Company :
Modal :
Code :

Sr. No. :148
Company :
Modal :
Code :

Sr. No. :132
Company :Vision Quest
Modal :all
Code :Input/Source 2580

Sr. No. :131
Company :Veste/
Modal :all
Code :Menu 4725 then select "RESET

Sr. No. :130
Company :Symphony
Modal :all
Code :Input/Source 2580

Sr. No. :129
Company :Toshiba
Modal :all
Code :On Menu, select "Installation", then " System Information" press the right arrow button. ("System Information" will change to "Factory Reset" or something similar) • Adjust the volume to zero, press the mute twice from the remote and press the menu button on the TV (fourth button from the bottom and marked p and decree it shares) to exit, the menu shut the TV • Press the Menu, Highlight the Picture, Press 9301, ok

Sr. No. :128
Company :Supra
Modal :all
Code :INPUT, 3, 1,3,8,MENU-1147,INPUT-2580,MENU-1147,MENU-2008,MENU-7050,INPUT-2580,"Menu", "Red", "Green", "Yellow", "Cyan,"MENU" - dial 2008,SOURCE - 3, 1,9,5, MENU -1, 1,4,7. Exit EXIT,

Sr. No. :127
Company :Videocon
Modal :all
Code :Menu 123 • Menu 0323 • Menu 1147 • Menu 1947 • Menu 6483 • Menu+Sound+8532

Sr. No. :126
Company :LG
Modal :all
Code :• Press and Hold the Menu button until 4 digit password displayed: • 8741 • 0413 • 0000 • 8878 • 7777 • 8743

Sr. No. :125
Company :Samsung
Modal :all
Code :• On Standby Press Mute+182+Power • Turn OFF, Info, Menu, Mute, Power

Sr. No. :124
Company :TCL
Modal :all
Code :• Menu+Contrast+9735 or 1950 • With the TV on, Select Home Select Setting and OK A 5121 Select System and OK Select About and OK, System info for TV will be displayed Use the remote and press the following sequence: Up, Right, Down, Right, Up Press the Fast Forward button 3 times Press the Rewind button 2 times

Sr. No. :123
Company :Haier
Modal :all
Code :• Menu 1147 • Menu 8202 • Menu 8893 • Menu 4578 • Menu+Highlight Audio+8893 • Press "MENU/EXIT"; Press 1999; Press "OK"

Sr. No. :122
Company :Orient
Modal :none
Code :• Input 2580, 2588 • Source 2588, 2580

Sr. No. :121
Company :Orient
Modal :none
Code :• Input 2580, 2588 • Source 2588, 2580

Sr. No. :120
Company :Ecostar
Modal :none
Code :• Menu 2008 • Menu 2508 • Menu 8002 • Menu 8202

Sr. No. :119
Company :Changhong Ruba
Modal :none
Code :• Source 3138 • Source 1125 • Source 42580 • Source 3130 • Menu 1125 • Menu 1147 • Menu 2580 • Menu 0816

Sr. No. :118
Company :Board Name
Modal :40-T31TOT-MAB2HG
Code :Menu. Contrast 1950 or 9735

Sr. No. :117
Company :Board Name
Modal :SP208ESA HK-7050A-V2.08-E
Code :Menu 7050

Sr. No. :116
Company :Board Name
Modal :350016386
Code :Menu 2008

Sr. No. :115
Company :Board Name
Modal :5800-A8M260-0020
Code :Source 3195

Sr. No. :114
Company :Board Name
Modal :LAD.MV59S.G
Code :Menu 7710

Sr. No. :113
Company :Board Name
Modal :T56J.11.2
Code :Menu 1147, Input 2580, Input 0000, Menu 8896, AV 208, AV 308

Sr. No. :112
Company :Board Name
Modal :TP.VST59s.PB813
Code :Menu 1147

Sr. No. :111
Company :Board Name
Modal :T.R85.031
Code :Menu 1147

Sr. No. :110
Company :Board Name
Modal :T.R83.031
Code :Menu 1147

Sr. No. :109
Company :Board Name
Modal :T.VST59.031
Code :Menu 1147

Sr. No. :108
Company :Board Name
Modal :VS.TP56L62.2
Code :Menu 1147

Sr. No. :107
Company :Board Name
Modal :VS.Tp53U61.2
Code :Input 208

Sr. No. :106
Company :Board Name
Modal :VS.Tp53U71.2
Code :Input 208

Sr. No. :105
Company :China Universal Board
Modal :Jumper Board
Code :• Source 2585 • Source 2587 • Source 3137 • Source 3138 • Source 3195 • Source 6483 • Source 7343 • Mute 6483

Sr. No. :104
Company :China Universal Board
Modal :Jumper Board
Code :• Input 208 • Source/Input 308 • Input 3195 • Source 0000 • Source 2283 • source 2285 • Source 2580 • Source 2583

Sr. No. :103
Company :China Universal Board
Modal :Jumper Board
Code :• Menu 8893 • Menu 8896 • Menu 9301 • Menu 9380 • Menu 9385 • Menu 9527 • Menu 9735 • Menu 9883 • Input 1147 • Input 2580 • Input 0000

Sr. No. :102
Company :China Universal Board
Modal :Jumper Board
Code :Menu 0000 • Menu 208 • Menu 0101 • Menu 710 • Menu 1234 • Menu 4711 • Menu 4725 • Menu 5880 • Menu 6181 • Menu 7050 • Menu 7168 • Menu 7343 • Menu 7710 • Menu 8093 • Menu 8500 • Menu 8202 • Menu 8593

Sr. No. :101
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2888

Sr. No. :100
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2880

Sr. No. :99
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2611

Sr. No. :98
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2588

Sr. No. :97
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2580

Sr. No. :96
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2508

Sr. No. :95
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2387

Sr. No. :94
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2383

Sr. No. :93
Company :China Universal Board
Modal :Jumper Board
Code :Menu 2008

Sr. No. :92
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1999

Sr. No. :91
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1973

Sr. No. :90
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1950

Sr. No. :89
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1199

Sr. No. :88
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1197

Sr. No. :87
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1187

Sr. No. :86
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1185

Sr. No. :85
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1167

Sr. No. :84
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1150

Sr. No. :83
Company :China Universal Board
Modal :Jumper Board
Code :Menu 1147

Sr. No. :82
Company :NEC
Modal :none
Code :While powering ON, hold "MENU" or "INPUT" on TV,

Sr. No. :81
Company :Insignia USA
Modal :none
Code :Input 2580 (TV is on)

Sr. No. :80
Company :Hisense
Modal :none
Code :“Parental ” enter 0000 then select “Clean All ~

Sr. No. :79
Company :COBY
Modal :none
Code :menu, Hi-Lite “audio” then enter 8893 Mode/Source 2580

Sr. No. :78
Company :Samsung and Sony Service
Modal :CV628-B42 CV338-B42 and CV338-A50 Boards
Code :Source 2580 Source 2583 Source 2587 Also other china universal boards service mode Menu 1147 Menu 1183 Menu 1185 Menu 1187

Sr. No. :77
Company :MI
Modal :ALL
Code :INSERT AC PLUG ...RELEASE STB. FROM TV POWER KEY THEN PRESS & HOLD POWER &OK KEYS IN REMOT ...........SOFTWEAR INSTT. SAME METHHOD

Sr. No. :76
Company :Element
Modal :none
Code :Menu 0000 > menu 1147

Sr. No. :75
Company :Dynex
Modal :none
Code :Source/Input 2580 Hold Vol down on TV and hold the (#1) button on remote

Sr. No. :74
Company :Beston led
Modal :none
Code :menu1147 input 2580

Sr. No. :73
Company :ONIDA
Modal :none
Code :MENU + 2008

Sr. No. :72
Company :Singer
Modal :none
Code :press the sequence on the remote control: 1, MUTE, RECALL, MUTE. 1, MUTE, DISPLAY MUTE

Sr. No. :71
Company :samsung LCD
Modal :none
Code :INFO, MENU, MUTE, POWER ON

Sr. No. :70
Company :Haier
Modal :HTR20 20" CRT TV
Code :Press MENU buton on TV pannel andMENU buton on remote control at the same time

Sr. No. :69
Company :Haier LCD
Modal :HL40XP1
Code : Press Menu button, press the key 8893, and Press “OK”

Sr. No. :68
Company :China lcd
Modal :none
Code :Press SLEEP→PIC→DSP→MENU button on the remote (2)Press MENU => Q.VIEW => MUTE to enter (3) "PRESET"."Ch ,press 2483

Sr. No. :67
Company :Beko - LCD
Modal :none
Code : Menu- 9, 3, 0, 1

Sr. No. :66
Company :seconmo AOC TV
Modal :none
Code :mode adjust volume to zero, press mute key and press number key 9 8 7 6

Sr. No. :65
Company :Haier
Modal :none
Code :1. Press “MENU/EXIT”; 2. Press”1”+”9” +”9” +”9”; 3. Press “OK”

Sr. No. :64
Company :Vestel
Modal :none
Code :Menu 4725 then select "RESET" Vision Quest Source / Input 2580 Vizio menu under “Help” tab is Factory Default enter 0000

Sr. No. :63
Company :Toshiba
Modal :none
Code :Menu, select “Installation”, then “ System Information” press the right arrow button. (“System Information” will change to “Factory Reset” or something similar)

Sr. No. :62
Company :Symphony
Modal :none
Code :Source/input 2580

Sr. No. :61
Company :Sony
Modal :none
Code :Hold “arrow up” on Remote and push power button on TV (TV is ON)

Sr. No. :60
Company :Sharp
Modal :none
Code :Menu, 1999 Menu, 3481 Menu, 1147 While holding [ VOL– & INPUT ] buttons on TV plug in set when “K ” appears push (VOL– & CHANNEL-)

Sr. No. :59
Company :Seiki
Modal :none
Code :Menu 0000

Sr. No. :58
Company :Samsung
Modal :none
Code :Mute 182 power Samsung (European) Power off, Info - Menu - Mute - Powe

Sr. No. :57
Company :Sanyo
Modal :none
Code :Hold VOL Down on TV, press and hold #1 button on remote, VOL will jump to halfway and set shuts off. Turn back on have 1st time setup screen

Sr. No. :56
Company :Panasonic
Modal :none
Code :Hold [ VOL— ] on TV, press and hold menu button on remote

Sr. No. :55
Company :Mitsubishi
Modal :none
Code :Menu 123 or Menu 2470 (TV is on) NEC While powering ON, hold "MENU" or "INPUT" on TV

Sr. No. :54
Company :Dynex
Modal :none
Code :Source/Input 2580

Sr. No. :53
Company :PANASONIC
Modal :TH-32A300DX
Code : Menu+1950

Sr. No. :52
Company :Micromax LCD/LED
Modal :none
Code :3) Service Menu - Random stuff Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 9, 7, 0 and 5 in series, Service Menu will appear in the left top of screen

Sr. No. :51
Company :Micromax LCD/LED
Modal :none
Code :2) Factory Menu - Access to color calibration & WB settings Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 9, 7, 3 and 5 in series, Factory Menu will appear in the left top of screen

Sr. No. :50
Company :Micromax LCD/LED
Modal :none
Code :1) Design Menu - Can access all other modes through this - Access to Overscan and other settings Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 1, 9, 5 and 0 in series, Design Menu will appear in the left top of screen

Sr. No. :49
Company :samsung led/lcd
Modal :none
Code :power info menu mute power

Sr. No. :48
Company :LLOYD
Modal :none
Code :menu+1147

Sr. No. :47
Company :LLOYD
Modal :none
Code :menu+sound balance+1969

Sr. No. :46
Company :Philips LED LCD
Modal :24PFL3457
Code :MENU+1950

Sr. No. :45
Company :Philips LED LCD
Modal :22PFL 4407
Code :MENU+2580

Sr. No. :44
Company :LG TV:
Modal :none
Code :press "Menu" buttons on remote and TV panel simultaneously for a few seconds

Sr. No. :43
Company :LG TV:
Modal :none
Code :Press and hold buttons on remote as well as TV panel for a few seconds

Sr. No. :42
Company :Samsung TV
Modal :none
Code :First power off your TV using the remote, then press following buttons quickly on the remote: Info + Settings + Mute + Power Mute + 1 + 8 + 2 + Power Mute + 1 + 1 + 9 + Power Display/Info + Menu + Mute + Power Display/Info + P.STD + Mute + Power P.STD + Help + Sleep + Power P.STD + Menu + Sleep + Power Sleep + P.STD + Mute + Power

Sr. No. :41
Company :Samsung TV
Modal :none
Code :Mute + 1 + 1 + 9 + Enter

Sr. No. :40
Company :Sony TV
Modal :none
Code :First power off your TV using the remote, then press following buttons quickly on your TV remote: Display (or i+) + 5 + Volume Up + Power

Sr. No. :39
Company :Toshiba LCD, LED
Modal :none
Code :1. Press the {MENU} button on the remote. 2. Highlight the "Picture" icon. 3. Press the {9} {3} {0} {1} buttons on the remote control. The Service Menu will be displayed with the following Modes: "Options" - "Adjustments" - "Selections" 4. Use the {OK} button to access and navigate through these Modes 5. To change values use {VOL +} {VOL-) {P+} {P-} 6. To exit, press the {MENU} button

Sr. No. :38
Company :LG LCD
Modal :none
Code :1 POWER ONLY 2 IN.STOP 3 IN.START 4 EZ.ADJ Intercode 0000 7777 0413 8741 8743 8878

Sr. No. :37
Company :VIDEOCON TV
Modal :none
Code :MENU +6483

Sr. No. :36
Company :VIDEOCON TV
Modal :none
Code :MENU +1147

Sr. No. :35
Company :VIDEOCON TV
Modal :none
Code :Design mode MENU +1982 SERVICE mode menu +1947

Sr. No. :34
Company :VIDEOCON TV
Modal :none
Code :Design mode MENU +0203 SERVICE mode MENU +0323

Sr. No. :33
Company :VIDEOCON LCD
Modal :none
Code :MENU+SOUNDS POP UP+8532

Sr. No. :32
Company :VIDEOCON LCD
Modal :none
Code :MENU+123

Sr. No. :31
Company :CHINA
Modal :none
Code :PRESS MENU BUTTON picture contrast NOW PRESS 9705

Sr. No. :30
Company :TELEFUNKEN
Modal :all model
Code :MENU+4725

Sr. No. :29
Company :Jumper board
Modal :V56U V56J.11.2
Code :INPUT+0000

Sr. No. :28
Company :Jumper board
Modal :V56U V56J.11.2
Code :INPUT+2580

Sr. No. :27
Company :Jumper board
Modal :TP.HV320.PB801
Code :MENU +1147

Sr. No. :26
Company :None
Modal :Jumper board
Code :Menu+8896

Sr. No. :25
Company :China
Modal :None
Code :mute+6483

Sr. No. :24
Company :China
Modal :None
Code :source+0000.

Sr. No. :23
Company :China
Modal :None
Code :source+menu+0000.

Sr. No. :22
Company :China
Modal :None
Code :source+3138

Sr. No. :21
Company :China
Modal :None
Code :source+2580

Sr. No. :20
Company :China
Modal :None
Code :menu+audio balance +1969

Sr. No. :19
Company :China
Modal :None
Code :menu+audio balance +0532

Sr. No. :18
Company :China
Modal :None
Code :menu / c- / 8532

Sr. No. :17
Company :China
Modal :None
Code :menu/ v+ / c- / 8532

Sr. No. :16
Company :China
Modal :None
Code :menu+8893

Sr. No. :15
Company :China
Modal :None
Code :menu+8896

Sr. No. :14
Company :China
Modal :None
Code :menu+2387

Sr. No. :13
Company :china
Modal :none
Code :menu+8202

Sr. No. :12
Company :china
Modal :none
Code :menu+2383

Sr. No. :11
Company :china
Modal :none
Code :menu+1183

Sr. No. :10
Company :china
Modal :none
Code :menu+1199

Sr. No. :9
Company :china
Modal :none
Code :menu+1167

Sr. No. :8
Company :china
Modal :none
Code :menu+1187

Sr. No. :7
Company :china
Modal :none
Code :menu+0000

Sr. No. :6
Company :china
Modal :none
Code :menu+1999

Sr. No. :5
Company :china
Modal :none
Code :menu+123

Sr. No. :4
Company :china
Modal :none
Code :menu+7343

Sr. No. :3
Company :china
Modal :none
Code :menu+4725

Sr. No. :2
Company :china
Modal :none
Code :menu+1147

Sr. No. :1
Company :SHARP LCD LED TV
Modal :None
Code :unplug the power cable. * Then while pressing the {INPUT} & {VOL -} buttons on the set , plug the power cable back into the outlet. * When it powers up you will see a little "k" appear in brackets. * Then on the TV, press and hold {VOL -} & {CH -} down and release. * The Service Menu will be displayed. * Use {CH+} {CH -} buttons to navigate * Use {VOL+} {VOL -} buttons to adjust the value. * select clear eprom display in menu press ok * Turn the set off to exit the Service Menu.